工作P原则
The sampler consists of two well-made steel pipes. The product comes with a sampling bottle, and the outer pipe has custom-made slots according to requirements. The internal pipe has the same number of slots. During sampling, the inner and outer pipes are inserted obliquely into the sample in a sealed manner, and then the handle of the outer pipe is rotated to collect the sample.
产品应用：
Professional sampling for materials in pharmaceutical factories, chemical enterprises, fertilizer plants, etc.
Standard material: 304 stainless steel; Service life: 8 years
Number of slots: 3 slots
Groove dimensions: Groove width 14mm, Groove length 65mm
The spacing between the three slots is 20mm (other slots can be customized).
Tail end requirements: straight-through sampling, with a sampling bottle at the end.
Outer diameter: φ20mm; Inner diameter: φ18mm; Length: 350mm
Features:
◆Sampling end slots are distributed in three sections: upper, middle, and lower.
◆Convenient product sampling
◆The parts are detachable, making them easy to clean and disinfect, and preventing bacterial contamination.
◆Independent sampling or mixed sampling is possible.
Instructions For Use:
First, close the handle to close the sampling port. Tilt the sampler into the material and rotate the handle 90° to open the sampling port. The sample will flow into the sampler. After rotating, close the handle and pull it out vertically at 90°, directly into the end sampling bottle.
Standard Configuration: sampler, sampling bottle
