Introduction:
VU-2D fully automatic electric impact specimen notch broaching machine is an ideal special equipment that can absolutely guarantee 100% processing of qualified 2mm V-shaped or U-shaped (or 3mm V-shaped and U-shaped, or 5mm U-shaped) notches. The VU-2D broaching machine is driven by a motor screw, supported by high-precision square rails, with tight matching of the sliders, stable and reliable operation, good wear resistance, low noise, and other advantages. It is suitable for testing institutions with relatively large test volumes. The VU-2D broaching machine can be configured with V-shaped or U-shaped broaches according to user requirements. The specimen notch is processed and formed in one time, and the processing only takes 10 seconds. The operation is simple, fast and reliable. The broaches are made of special materials and special processes for precision processing. They have high hardness, good wear resistance and long service life. The processed V-shaped notch or U-shaped notch (2mm, 3mm and 5mm) can meet the corresponding requirements of domestic and foreign standards such as GB2106-80, GB229-2020, ASTME23, ISO148.ISO0083, etc., and replacement is convenient and simple.
This product can meet the V-shaped and U-shaped notch requirements of the international standard ASTM E23 and ISO14 specimens (V-shaped specimen 45±1°, depth and width 2±0.025mm. U-shaped specimen arc diameter 1±0.025mm). After the notch is cut, both the front and back sides can meet the above standard requirements.
